TMEK-S and TMEK-SVM
Polycarbonate enclosure from 50 to 630 A
Safety enclosures equipped with switches provide emergency breaking, breaking for mechanical maintenance and safety isolation in the vicinity of any low voltage final circuit.
Dedectable cut-off
Handle indicates clearly position of contacts, guaranteeing switch operation.
Compliance with standards
IEC 60947-3 / EN 60947-3 / VDE 0660-107 (1992)
Built for safety
Thanks to the dedicated cut-off equipment, the user can operate on the equipment quickly and safely.
Resistant
A secure enclosure, equipment and fittings adapted to an aggressive and harsh environment.
Easy to install
Secure connections and commissioning with a well equipped enclosure.
Visible cut-off
The technology of the contacts, positioned in parallel on a movable bar, make it possible to check the contacts are correctly separated.
Triple safety handle
It allows the installation to be locked by 3 locks when the switch is in the opened position.
Standart
Polycarbonate enclosure. 1pc NO/NC auxiliary contacts for pre-break , the 2nd auxiliary contact is optional. The enclosure has an IP65 degree of protection Push buttons and Emergency stop button is optional.
Metal safety handle
For heavy duty use, metal handles are provided which can be locked by 3 locks when the switch is in the opened position. (This option is available for TMEK-S enclosures 50A and 80A only)
Double locking
This prevents the switch from being closed if the enclosure is open, but also prevents the enclosure from being opened if the switch is closed.
Suitable for loto
In conformity with LOTO (Lock out / Tag out) safety rules
Product selection
TMEK-S(VM) 3xXXXA_B/B_P_XXXX_1NO/NC_XX_IP65
TMEK-S and TMEK-SVM
GRP enclosures from 50 to 630 A with high impact resistance
Safety enclosures equipped with switches provide emergency breaking, breaking for mechanical maintenance and safety isolation in the vicinity of any low voltage final circuit.
Dedectable cut-off
Handle indicates clearly position of contacts, guaranteeing switch operation.
Compliance with standards
IEC 60947-3 / EN 60947-3 / VDE 0660-107 (1992)
Built for safety
Thanks to the dedicated cut-off equipment, the user can operate on the equipment quickly and safely.
Resistant
A secure enclosure, equipment and fittings adapted to an aggressive and harsh environment.
Easy to install
Secure connections and commissioning with a well equipped enclosure.
Visible cut-off
The technology of the contacts, positioned in parallel on a movable bar, make it possible to check the contacts are correctly separated.
Triple safety handle
It allows the installation to be locked by 3 locks when the switch is in the opened position.
Standart
2 pushbuttons, 22 mm Ø (1 green/1 red): Identification labels “Start” and “Stop”
1pcs NO/NC auxiliary contacts for pre-break, the 2nd auxiliary contact is optional.
The enclosure has an IP65 degree of protection.
Emergency stop button is optional.
Metal safety handle
For heavy duty use, metal handles are provided which can be locked by 3 locks when the switch is in the opened position. (This option is available for TMEK-S enclosures 50A and 80A only)
Double locking
This prevents the switch from being closed if the enclosure is open, but also prevents the enclosure from being opened if the switch is closed.
Suitable for loto
In conformity with LOTO (Lock out / Tag out) safety rules
Product selection
TMEK-S(VM) 3xXXXA_B/B_P_XXXX_1NO/NC_XX_IP65_10
S : Sider type switch (current ratings : 50A – 80A – 125A – 200A -400A -630A)
Handle type for S switches : Grey metallic handle for 50A and 80A, red plastic handle for higher ratings
SVM : Sirco VM type switch (Current ratings: 63A – 80A -100A – 125A -160A)
Handle type for SVM switches : Red plastic handle
B/B : Cable IN bottom / Cable OUT : bottom
P : Polycarbonate enclosure
Push button conguration
2111 : 2 pushbuttons, Ø 22 mm (1 green/1 red): Identication labels “Start” and “Stop”
2113: 2 pushbuttons, Ø 22 mm (1 green/1 red): Identication labels “Start” and “Stop” 1 selector with 2 positions: Identication label “Local-Remote”)
2115: 3 pushbuttons, Ø 22 mm (2 green/1red): Identication labels “Start”, “Stop” and “Reverse”)
2117: 3 pushbuttons, Ø 22 mm (2 green/1 red): Identication labels “Start”, “Stop” and “Reverse” 1 selector with 2 positions: Identication label “Local-Remote”) without push buttons
Auxiliary Contacts
1NO/1NC : 1 normally open, 1 normally closed contact
Flange
FP : Standard membrane ange
GL : Cable glands
IP rating
IP rating : IP65
Resistance to Impact
IK10
Example :
TMEK-S 3x50A_B/B_P_2111_1NO/NC_FP_IP65_10
Polycarbonate safety enclosure with Sider switch, 3x50A, bottom IN/bottom OUT, polycarbonate, 1 green+1red button, 1 auxiliary contact, membrane ange, IP65, IK10
Dimensions
TMEK-S 3x50A / w.260 x h.305 x d.160
TMEK-S 3x80A / w.260 x h.305x d.160
TMEK-S 3x125A / w.340 x h.430x d.180
TMEK-S 3x200A / w.450 x h.505x d.220
TMEK-S 3x400A / w.560 x h.655x d.260
TMEK-S 3x630A / w.630 x h.810x d.300