TMEK-F Safety Enclosures
Fuse switch enclosures : Sheet Metal enclosures rom 32A to 400 A
Sheet steel enclosure with galvanized mounting plate adapted to mechanical risks and dust hazard, RAL 7035 powder coating Side operated with black/blue handle (Yellow/red on request) 1pc NO/NC auxiliary contacts for pre-break (blown fuse aux contact is optional)
The enclosure has an IP55 degree of protection with foamed
PU sealing gasket
Wall mounting with mounting pieces
Solid door with hinges
Lock : Polyamide key lock (key supplied)
Cable in and out : Bottom/Bottom
Fuse Switch
The fuse switch is Fuserbloc 3P from 32A to 400A operated by right hand side extension handle. (to be used with DIN type NH fuses or cylindrical fuses)
Double Locking
This prevents the switch from being closed if the enclosure is open, but also prevents the enclosure from being opened if the switch is closed.
Compliance with standards
The fuse switches comply with the following standards : IEC 60947-3 / EN 60947-3 / VDE 0660-107
Built for safety
This prevents the switch from being closed if the enclosure is open, but also prevents the enclosure from being opened if the switch is closed.
Resistant
A secure enclosure, equipment and fittings adapted to an aggressive environment.
Easy to install
Secure connections and commissioning with a well equipped enclosure.
Detectable Cut-off
Handle indicates clearly position of contacts, guaranteeing switch operation.
Triple safety handle
It allows the installation to be locked by 3 locks when the switch is in the opened position
Monitoring window
The enclosure is equipped with a monitoring window to check the condition of the fuses without opening the enclosure. (Please enquire about fuses with indicator /striker)
Product selection
TMEK-F (Y/R) 3xXXX A_B/B_M_NONE_1NO/NC_GL_IP55
Switch type
F : Fuse switch (current rating : 32A to 400A)
Handle type for F switches : Black and blue plastic handle
(Y/R) Yellow/red operating handle
B/B : Cable IN bottom / Cable OUT : bottom
M : Sheet steel enclosure
Push button configuration
NONE : Without push buttons
Auxiliary Contacts
1NO/1NC : 1 normally open, 1 normally closed contact
Flange
GL : Cable glands plastic or brass according to switch rating /customer specifications
IP rating
IP rating : IP55
Example:
TMEK-F (Y/R) 3×250 A_B/B_M_NONE_1NO/NC_GL_IP55
Sheet metal fuse switch enclosure with 3x250A fuse swİtch, bottom IN/ bottom OUT, without push buttons, with one auxiliary contact NO/NC, equipped with cable glands , IP55 enclosure
