PMX Modular fuse holders

8×32

1 POLE
1 POLE + N
2 POLES
3 POLES
3 POLES + N
4 POLES
NEUTRAL

RATED VOLTAGE
400V AC/DC

RATED CURRENT
25A

RATED POWER DISIPATION
2,5W

MAXIMUM POWER DISIPATION
3W

10×38

1 POLE
1 POLE + N
2 POLES
3 POLES
3 POLES + N
4 POLES
NEUTRAL

RATED VOLTAGE
690V AC
750V DC

RATED CURRENT
32A
30A (UL Midget)

RATED POWER DISIPATION
3W

MAXIMUM POWER DISIPATION
4W

14×51

1 POLE
1 POLE + N
2 POLES
3 POLES
3 POLES + N
4 POLES
NEUTRAL

RATED VOLTAGE
IEC
 690V AC/750V DC
UL-CSA 750V AC

RATED CURRENT
IEC 50A
UL-CSA 50A

RATED POWER DISIPATION
5W

MAXIMUM POWER DISIPATION
6W

22×58

1 POLE
1 POLE + N
2 POLES
3 POLES
3 POLES + N
4 POLES
NEUTRAL

RATED VOLTAGE
IEC
 690V AC/750V DC
UL-CSA 750V AC

RATED CURRENT
100A (accept 125A fuse links)

RATED POWER DISIPATION
9,5W

MAXIMUM POWER DISIPATION
12W

Accessories

pmx-fuse-holders-multipole-assembly

Multi-pole assembly
Standard system by DF Electric, 3 clips and 1 pin for each union between poles.

Identification by label
Open the label-holder part when the fuse holder is totally closed or totally open, put on the label and close.
Special IP20 protection
The accessory mut be positioned in the wire entries, if it’ s neccesary to achieve the IP20 degree of protection with thin wires.
Screw protection accesory
Protection accesory to avoid the screws manipulation and improve the protection degree.
Screw fixation accessory
First mount the accessory with screws, then mount the fuseholder (there are available differents accessories depending the number of the fuseholder).

STANDARDS

IEC/EN 60269-1
IEC/EN 60269-2
UL4248-1 Fuseholders.
UL486E Wiring terminals
CSA C22.2 Nº 4248-1 Fuseholder assemblies
CSA 22.2 Nº 65 Wire connectors

pmx-fuse-holders-microswitch-mounting

Microswitch mounting
Put on the microswitch on the guides, and push in horizontal movement to the final position. * For ONLY FUSION accessory, first mount the lifter in his place.

 

Padlock accessory
To avoid the operation and connection when the fuseholder is open, introduce the padlock accesory into the symmetrical holes. All accessories allow using three padlocks at the same time and have a repose mode.

 

Phase separators accessory
The accessory increases the distance between phases in multipolar asemblies.

Screw fixation accessory
First mount the accessory with screws, then mount the fuseholder (there are available differents accessories depending the number of the fuseholder).